VELCRO Heavy Duty Stick On Tape 50mm

Fosseway Tapes are proud to provide VELCRO Heavy Duty Stick On Tape that has a general-purpose adhesive that is recommended for smooth surfaces. Our heavy-duty stick-on VELCRO® Brand tape incorporates a 50% stronger closure and adhesive that can be used indoors and out, securing items such as temporary number plates, first aid kits and outdoor torches. It has never been so quick or easy.

With the extra strength of VELCRO® Brand heavy duty tape can hold up to 7KG per 50mm x 100mm strip.

This tape is suitable for numerous commercial applications including: – but not limited to – fitting curtains to wood and other surfaces, carpet fitting and industrial industries.

Heavy Duty Velcro Tape Uses

This VELCRO® Brand tape can be used for pretty much any conceivable application that requires a low - Medium tack where a temporary bond is simply required.

It is is a perfect way to for / to secure:

• Large, & heavy items
• Items without nails and screws or messy glue
• Home DIY projects
• Large pictures
• Mirrors & other heavy items
• First aid kits
• Fitting curtains to wood and other surfaces
• Carpet fitting and industrial industries
• Temporary number plates, first aid kits & outdoor torches
• Sticking items to boxes
• Attaching Roman blinds, bath panels, carpets, kitchen floor tiles & notice boards

Velcro Heavy Duty Velcro being used

Blends in seamlessly

You will not need to worry with unprofessional looking finishes to your fastened products - or work - either; as these VELCRO® Branded Tapes blend into black plastic surfaces for an inconspicuous, professional and modern look.

Water-resistant

Our VELCRO® Brand Heavy Duty Tapes are water-resistant, which is prefect for an array of day to day applications both indoors and outdoors.

Rubber-based Adhesive

These VELCRO® Brand Heavy Duty tapes are a rubber-based pressure sensitive adhesive which has a good adhesion to low surface energy substrates.

Ideal for appropriate High cycle life applications

These VELCRO® Brand tapes are a high quality fasten-and-leave product. As there is only a minimal decline in effectiveness over time - even after many fastening and unfastenings – these VELCRO® Brand tapes means you will only need to use them once and then not need to worry about replacing them again for most applications.

Lengths

This pack contains a 5m roll of white or black industrial strength VELCRO Heavy Duty Stick On Tape.

Indoor and Outdoor uses

This adhesive strong tape is suitable for indoor and outdoor use.

Colours

This tape is available in the following colours

• White
• Black

VELCRO® Brand Heavy Duty Roll Price

This Velcro tape costs from as little as £6.11 / metre including VAT.

Application information

To apply this tape please:

• Clean and dry the surface before application
• Peel tape from the fastener and press firmly into place
• Adhesive reaches maximum strength after 24 hours

Technical Information

Not recommended for

Please note this tape is not recommended for use on:

• Fabrics
• Car dashboards
• Flexible vinyl
• Underwater use

Continued exposure to full sunlight can damage this heavy duty fastener as well.

Not sure if this Velcro tape is right for your requirements?

If you are not sure if this adhesive tape is correct for your requirements please contact us to discuss your requirements and we can point you in the right direction.

Questions asked about this product

Question: Would this be ok to stick runner rug to carpet without damaging carpet?

Answer: Yes, heavy duty Velcro tape can be a suitable option for sticking a runner rug to a carpet without damaging the carpet. The adhesive on the Velcro tape is designed to provide a strong hold while being gentle on surfaces. However, it is important to note that the suitability of the tape may depend on the specific type of carpet and rug you have.

Before applying the Velcro tape, it is recommended to test it on a small, inconspicuous area of the carpet to ensure compatibility and to check for any adhesive transfer. Additionally, make sure that both the carpet and the back of the runner rug are clean and dry before applying the tape for optimal adhesion.

By using heavy duty Velcro tape, you can securely attach the runner rug to the carpet, preventing it from slipping or moving while minimizing the risk of damage to the carpet fibers.

Question: Well how much would I need for 12ft runner rug length 2ft 2in wide

Answer: To determine the amount of heavy duty Velcro tape you would need for a 12ft runner rug that is 2ft 2in wide, you will need to consider the length of the rug that needs to be secured.

Assuming you want to secure the entire length of the runner rug, you would need a strip of Velcro tape that is at least 12ft long. It is recommended to use multiple strips of Velcro tape along the length of the rug for better stability and hold.

As for the width of the tape, it would depend on your preference and the weight of the rug. A width of 1 inch or 2 inches should be sufficient for most applications.

Keep in mind that it's always a good idea to have some extra tape on hand in case you need to make adjustments or add more secure points.